About your monitor
|
15
Electrical specifications
Description
Values
Video input signals
• HDMI 1.4 , 600mV for each differential line, 100
ohm input impedance per differential pair
• Analog RGB, 0.7 Volts +/- 5%, positive polarity at
75 Ω input impedance
Input voltage/ frequency/
current
100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.5 A
(maximum)
Inrush current
120 V: 30 A (max.) at 0°C (cold start)
240 V: 60 A (max.) at 0°C (cold start)
Power Consumption
0.3 W (Off Mode)
1
0.3 W (Standby mode)
1
15.7 W (On Mode)
1
24 W (Max)
2
15.9
W (P
on
)
3
49.7
kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
P
on
: Power consumption of On Mode measured with reference to Energy Star test
method.
TEC: Total energy consumption in kWh measured with reference to Energy Star test
method.
CAUTION: This document is informational only and reflects laboratory
performance. Your product may perform differently, depending on the
software, components and peripherals you ordered and shall have no
obligation to update such information. Accordingly, the customer should
not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is
expressed or implied.
