Dell SC4020 Deployment Manual Download Page 8

Page: 8 / 184

About this Guide

This guide describes how to install and configure an SC4020 storage system.

Revision History

Document Number: 690-052-001

Revision

Date

Description

May 2014

Initial release

June 2014

Updated the storage controller configuration instructions and
removed a reference to an internal document

August 2014

Added information about iSCSI front-end connectivity

October 2014

Added information about SFP+ transceiver modules and
contacting Dell technical support

June 2015

Added information about new features for SC4020 storage
systems running Storage Center 6.6.4 or later

December 2015

Added information about 16 Gb Fibre Channel front-end
connectivity

August 2016

Added information about 12 Gb front-end SAS connectivity

Audience

The information provided in this Deployment Guide is intended for use by Dell installers and Dell business

partners.

Contacting Dell

Dell provides several online and telephone-based support and service options. Availability varies by

country and product, and some services might not be available in your area.

To contact Dell for sales, technical support, or customer service issues, go to

www.dell.com/support

• For customized support, type your system service tag on the support page and click

Submit

• For general support, browse the product list on the support page and select your product.

Related Publications

The following documentation is available for the SC4020 storage system.

•

Dell Storage Center SC4020 Storage System Getting Started Guide

Provides information about an SC4020 storage system, such as installation instructions and technical
specifications.

•

Dell Storage Center SC4020 Storage System Owner’s Manual

Summary of Contents for SC4020

























































































































































































Search results

Summary of Contents for SC4020

Reviews:

Brands by name

Popular brands

Dell SC4020, Deployment Manual

Search results

Summary of Contents for SC4020

Reviews:

Brands by name

Popular brands