Dell S6100, Configuration Manual

Page: 926 / 1743

Version Description
7.8.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related Commands
• show mac learning-limit — display details of the mac learning-limit.
mac learning-limit mac-address-sticky
Maintain the dynamically learned mac addresses as sticky MAC addresses on the selected port.
Syntax mac learning-limit mac-address-sticky
To convert the sticky MAC addresses to dynamic MAC addresses, use the
no mac learning-limit
command.
Parameters
mac-address-sticky Configures the dynamic MAC addresses as sticky on an interface.
Defaults None
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
Usage Information If you configure
mac-learn-limit
and the sticky MAC feature is enabled, dynamically learned MAC addresses
are converted to sticky for that port. Any new MAC address that is learned also becomes sticky for that port.
Related Commands
• show mac learning-limit — display the details of the mac learning-limit.
926 Layer 2