Parameters
name
Give a name to the group of addresses in a pool.
Defaults
None
Command Modes
DHCP <
POOL
>
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.2.1.0
Introduced on the C-Series and S-Series.
excluded-address
Prevent the server from leasing an address or range of addresses in the pool.
Syntax
excluded-address [
address
|
low-address high-address
]
Parameters
address
Enter a single address to be excluded from the pool.
low-address
Enter the lowest address in a range of addresses to be excluded from the pool.
high-address
Enter the highest address in a range of addresses to be excluded from the pool.
Defaults
None
Command Modes
DHCP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100–ON.
Dynamic Host Configuration Protocol (DHCP)
547
