Port Vlan Bindings:
Te 1/1/9/1: VLAN: 2 (0x80000001)
Dell#show vxlan vxlan-instance 1 logical-network
Instance : 1
Total LN count : 1
Name VNID
bffc3be0-13e6-4745-9f6b-0bcbc5877f01 4656
Dell#$n-instance 1 logical-network n 2a8d5d19-8845-4365-ad04-243f0b6df252
Name : 2a8d5d19-8845-4365-ad04-243f0b6df252
Description :
Tunnel Key : 2
VFI : 28674
Unknown Multicast MAC Tunnels:
192.168.122.133 : vxlan_over_ipv4 (up)
Port Vlan Bindings:
Te 1/1/1/1: VLAN: 0 (0x80000001),
Fo 1/4/1 : VLAN: 0 (0x80000004),
Related Commands
— Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance physical-locator
Displays physical locators related to Network Virtualization Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance
instance ID
physical—locator [vtep-ip
A.B.C.D
]
Parameters
instance ID
Enter the VXLAN instance ID. The platform supports only the instance ID
1
in the initial
release.
A.B.C.D
Enter the IP address of the VTEP.
Defaults
Disabled
Command Modes
VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant
Dell
Networking OS Command Line Reference Guide
.
Version
Description
9.11(0.0)
Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, and Z9100–ON.
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0)
Introduced on the S4048–ON.
9.7(0.0)
Introduced on the S6000-ON.
9.4.(0.0)
Introduced on the S6000.
Example
Dell#show vxlan vxlan-instance 1 physical-locator
Instance : 1
Tunnel : count 1
36.1.1.1 : vxlan_over_ipv4 (up)
1702
Virtual Extensible LAN (VXLAN)
