The export-target and import-target support only the match the protocol and prefix-list options. Other options that
you configure in the route-maps are ignored.
Related Commands
•
— exports IPv6 routes to another VRF.
match source-protocol
Specify matching source-protocol criteria while exporting or importing routes.
Syntax
match source-protocol {bgp | isis | ospf | connected | static}
Parameters
bgp
Enter the keyword
bgp
to leak or share routes corresponding to the BGP protocol.
isis
Enter the keyword
isis
to leak or share routes corresponding to the ISIS protocol.
ospf
Enter the keyword
ospf
to leak or share routes corresponding to the OSPF protocol.
connected
Enter the keyword
connected
to leak or share connected routes corresponding to the
VRF.
static
Enter the keyword
static
to leak or share static routes corresponding to the VRF.
Command Modes
ROUTE MAP MODE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Usage Information
Specify the matching criteria only after defining a route-map. Before using this command, you must enter Route
Map mode using the
route-map
route-map-name
command. The match criteria that you specify is
associated with the route-map that you define.
The export-target and import-target options support only the match protocol and match prefix-list options. Other
options that you configure in the route-maps are ignored.
Related Commands
•
– imports IPv6 routes from another VRF.
redistribute
Redistributes leaked or exported routes corresponding to specific protocols.
Syntax
redistribute {imported-bgp | import-ospf | import-isis}
Virtual Routing and Forwarding (VRF)
1657
