Dell S6100, Configuration Manual

Page: 1414 / 1743

Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.0 Introduced on the E-Series.
Usage Information
The key configured on the switch must match the key configured on the RADIUS server daemon.
If you configure the
key
parameter in the
radius-server host
command, the key configured with the
radius-server key
command is the default key for all RADIUS communications.
Related Commands
• radius-server host — configures a RADIUS host.
radius-server retransmit
Configure the number of times the switch attempts to connect with the configured RADIUS host server before declaring the RADIUS host
server unreachable.
Syntax radius-server retransmit retries
To configure zero retransmit attempts, use the
no radius-server retransmit
command.
To return to the default setting, use the
radius-server retransmit 3
command.
Parameters
retries Enter a number of attempts that the Dell OS tries to locate a RADIUS server. The range is
from zero (0) to 100. The default is
3 retries .
Defaults 3 retries
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
1414 Security