Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000–ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre-6.1.1.0
Introduced on the E-Series.
Usage Information
CAUTION:
Encrypting passwords with this command does not provide a high level of security. When
the passwords are encrypted, you cannot return them to plain text unless you re-configure them. To
remove an encrypted password, use the
no password password
command.
To keep unauthorized people from viewing passwords in the switch configuration file, use the
service
password-encryption
command. This command encrypts the clear-text passwords created for user name
passwords, authentication key passwords, the privileged command password, and console and virtual terminal line
access passwords.
To view passwords, use the
show running-config
command.
show privilege
View your access level.
Syntax
show privilege
Command Modes
•
EXEC
•
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
Security
1401
