Dell S6100, Configuration Manual

Page: 1350 / 1743

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
rmon event
Add an event in the RMON event table.
Syntax rmon event number [log] [trap community ] [description string ]
To disable RMON on an interface, use the
no rmon event number
command.
Parameters
number Assign an event number in integer format. The range is from 1 to 65535. You must ensure
that the value you enter is unique in the RMON event table.
log (OPTIONAL) Enter the keyword log to generate an RMON event log. This option sets
the eventType to either log or log-and-snmptrap in the RMON event table. The default is
None.
trap community (OPTIONAL) Enter the keyword
trap
followed by the SNMP community string to
generate SNMP traps for an RMON event entry. This option sets the eventType to either
snmptrap or log-and-snmptrap in the RMON event table. In addition to the SNMP traps,
this option also generates a syslog.
description string (OPTIONAL) Enter the keyword
description
then a string describing the event.
owner name (OPTIONAL) Enter the keyword
owner
then the name of the owner of this event.
Defaults As noted in the Parameters section.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
1350 Remote Monitoring (RMON)