Version
Description
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.0
Introduced on the E-Series.
rmon collection statistics
Enable RMON MIB statistics collection on an interface.
Syntax
rmon collection statistics {controlEntry
integer
} [owner
name
]
To remove RMON MIB statistics collection on an interface, use the
no rmon collection statistics
{controlEntry
integer
}
command.
Parameters
controlEntry
integer
Enter the keyword
controlEntry
to specify the RMON group of statistics using a
value. Then enter an integer value from 1 to 65535 that identifies the RMON Statistic
Table. The integer value must be a unique in the RMON statistic table.
owner
name
(OPTIONAL) Enter the keyword
owner
then the owner name to record the owner of the
RMON group of statistics.
Defaults
none
Command Modes
CONFIGURATION INTERFACE (config-if)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
Remote Monitoring (RMON)
1349
