set
Mark outgoing traffic with a differentiated service code point (DSCP) or dot1p value.
Syntax
set {ip-dscp
value
| mac-dot1p
value
}
Parameters
ip-dscp
value
(OPTIONAL) Enter the keywords
ip-dscp
then the IP DSCP value. The range is from 0
to 63.
mac-dot1p
value
Enter the keywords
mac-dot1p
then the dot1p value. The range is from 0 to 7.
Defaults
none
Command Modes
CONFIGURATION (conf-qos-policy-in)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.2.1.0
Added mac-dot1p on the C-Series and S-Series.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
7.4.1.0
E-Series Only: Added support for mac-dot1p.
6.1.1.1
Introduced on the E-Series.
Usage Information
After the IP DSCP bit is set, other QoS services can then operate on the bit settings.
Quality of Service (QoS)
1287