match ip precedence
Use IP precedence values as a match criteria.
Syntax
match {ip | ipv6 | ip-any} precedence ip-
precedence-list
[set-ip-dscp
value
]
To remove IP precedence as a match criteria, use the
no match {ip | ipv6 | ip-any} precedence
ip-
precedence-list
[[multicast] set-ip-dscp
value
]
command.
Parameters
ip
Enter the keyword
ip
to support IPv4 traffic.
ipv6
Enter the keyword
ipv6
to support IPv6 traffic.
ip-any
Enter the keyword
ip-any
to support IPv4 and IPv6 traffic.
ip-precedence-list
Enter the IP precedence value(s) as the match criteria. Separate values by commas — no
spaces ( 1,2,3 ) or indicate a list of values separated by a hyphen (1-3). The range is from
0 to 7.
set-ip-dscp
value
(OPTIONAL) Enter the keywords
set-ip-dscp
then the IP DSCP value. The matched
traffic is marked with the DSCP value. The range is from 0 to 63.
Defaults
none
Command Modes
CLASS-MAP CONFIGURATION (config-class-map)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.5(0.1)
Introduced on the Z9500.
9.5(0.0)
Added support for the ipv6 and ip-any options on the Z9000, S6000, S4820T, S4810,
MXL.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Added the keyword multicast . Added support for the DSCP Marking option for the S-
Series.
1272
Quality of Service (QoS)