Dell S6100, Configuration Manual

Page: 1079 / 1743

distance
Define an administrative distance for particular routes to a specific IP address.
Syntax distance weight [ ip-address mask access-list-name ]
To delete the settings, use the
no distance weight [ ip-address mask access-list-name ]
command.
Parameters
weight Specify an administrative distance. The range is from 1 to 255. The default is 110 .
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If you enter a router ID,
include the mask for that router address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n format.
access-list-name (OPTIONAL) Enter the name of an IP standard access list, up to 140 characters.
Defaults 110
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1079