Dell#
08:14:24 : OSPF(100:00):
Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1
aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Te 1/1/3/1 dst:224.0.0.5
netmask:255.255.255.0 pri:1 N-, MC-, E+, T-,
hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0
default-information originate
To generate a default external route into an OSPF routing domain, configure Dell Networking Operating System (OS).
Syntax
default-information originate [always] [metric
metric-value
] [metric-type
type-
value
] [route-map
map-name
]
To return to the default values, use the
no default-information originate
command.
Parameters
always
(OPTIONAL) Enter the keyword
always
to specify that default route information must
always be advertised.
metric
metric-value
(OPTIONAL) Enter the keyword
metric
then a number to configure a metric value for
the route. The range is from 1 to 16777214.
metric-type
type-
value
(OPTIONAL) Enter the keywords
metric-type
then an OSPF link state type of 1 or 2
for default routes. The values are:
•
1 = Type 1 external route
•
2 = Type 2 external route
route-map
map-
name
(OPTIONAL) Enter the keywords
route-map
then the name of an established route
map.
Defaults
Disabled.
Command Modes
ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
1076
Open Shortest Path First (OSPFv2 and OSPFv3)
