•
Install a flash memory card with larger capacity.
Note:
Downloaded fonts and macros not previously stored in the flash memory are deleted.
Paper changes needed
Try one or more of the following:
•
From the printer control panel, select
Prompt for each page
to continue printing.
•
Select
Use current supplies
to continue printing using the paper loaded in the tray.
•
Cancel the current print job.
Parallel port [x] disabled [56]
Do either of the following:
•
From the printer control panel, select
Continue
to clear the message and continue printing.
The printer discards any data received through the parallel port.
•
Select
Reset active bin
to reset the bin for a linked set of bins.
Reattach bin [x]
Try one or more of the following:
•
Turn off the printer, and then turn it back on.
•
Reattach the indicated bin.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the indicated bin.
4
Reattach the bin.
5
Connect the power cord to a properly grounded electrical outlet.
6
Turn the printer back on.
•
Remove the indicated bin:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the indicated bin.
4
Contact technical support or your Dell printer dealer.
•
From the printer control panel, touch
Continue
to clear the message and print without using the
specified bin.
Troubleshooting
181
