Dell S5830DN User Manual Download Page 178

Page: 178 / 232

Load [paper source] with [paper size] [paper orientation]

Try one or more of the following:

•

Load the tray or feeder with the correct size of paper, and then touch

Finished loading paper

on the

control panel.

•

Touch

Reset active bin

to reset the active bin for a linked set of bins.

•

Cancel the current job.

Load [paper source] with [paper type] [paper size] [paper orientation]

Try one or more of the following:

•

Load the speciﬁed tray or feeder with the correct size and type of paper, and then touch

Finished

loading paper

on the control panel.

•

Touch

Reset active bin

to reset the active bin for a linked set of bins.

•

Cancel the current job.

Load Multipurpose Feeder with [custom string] [paper orientation]

Try one or more of the following:

•

Load the feeder with the correct size and type of paper.

•

From the control panel, touch one of the following:

–

Prompt each page, paper loaded

Do not prompt, paper loaded

—To clear the message and

continue printing.

–

Automatically select paper

—To use the paper loaded in the tray.

–

Reset active bin

—To reset the active bin for a linked set of bins.

•

Cancel the print job.

Load Multipurpose Feeder with [custom type name] [paper orientation]

Try one or more of the following:

•

Load the feeder with the correct size and type of paper.

•

From the control panel, touch one of the following:

–

Prompt each page, paper loaded

Do not prompt, paper loaded

—To clear the message and

continue printing.

–

Automatically select paper

—To use the paper loaded in the tray.

–

Reset active bin

—To reset the active bin for a linked set of bins.

•

Cancel the print job.

Troubleshooting

178

Summary of Contents for S5830DN









































































































































































































































Search results

Summary of Contents for S5830DN

Reviews:

Brands by name

Popular brands

Dell S5830DN, User Manual

Search results

Summary of Contents for S5830DN

Reviews:

Brands by name

Popular brands