Dell(config-as-path)#deny 32$
Dell(config-as-path)#ex
Dell(conf)#router bgp 99
Dell(conf-router_bgp)#neighbor AAA filter-list Eagle in
Dell(conf-router_bgp)#show conf
!
router bgp 99
neighbor AAA peer-group
neighbor AAA filter-list Eaglein
neighbor AAA no shutdown
neighbor 10.155.15.2 remote-as 32
neighbor 10.155.15.2 filter-list 1 in
neighbor 10.155.15.2 shutdown
Dell(conf-router_bgp)#ex
Dell(conf)#ex
Dell#show ip as-path-access-lists
ip as-path access-list Eagle
deny 32$
Dell#
Redistributing Routes
In addition to filtering routes, you can add routes from other routing instances or protocols to the BGP process. With the
redistribute
command, you can include ISIS, OSPF, static, or directly connected routes in the BGP process.
To add routes from other routing instances or protocols, use any of the following commands in ROUTER BGP mode.
•
Include, directly connected or user-configured (static) routes in BGP.
ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode
redistribute {connected | static} [route-map
map-name
]
Configure the
map-name
parameter to specify the name of a configured route map.
•
Include specific ISIS routes in BGP.
ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode
redistribute isis [level-1 | level-1-2 | level-2] [metric
value
] [route-map
map-name
]
Configure the following parameters:
•
level-1
,
level-1-2
, or
level-2
: Assign all redistributed routes to a level. The default is
level-2
.
•
metric
value
: The value is from 0 to 16777215. The default is
0
.
•
map-name
: name of a configured route map.
•
Include specific OSPF routes in IS-IS.
ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode
redistribute ospf
process-id
[match external {1 | 2} | match internal] [metric-type {external
| internal}] [route-map
map-name
]
Configure the following parameters:
•
process-id
: the range is from 1 to 65535.
•
match external
: the range is from 1 or 2.
•
match internal
•
metric-type
: external or internal.
•
map-name
: name of a configured route map.
Border Gateway Protocol IPv4 (BGPv4)
207
Summary of Contents for S4048T-ON
