Dell S4048-ON, Configuration Manual

Page: 34 / 1039

1
About this Guide
This guide describes the protocols and features the Dell Networking Operating System (OS) supports and provides configuration
instructions and examples for implementing them.
The S4048–ON platform is available with Dell Networking OS version 9.7.(0.1) and beyond.S4048–ON stacking is supported with
Dell Networking OS version 9.7(0.1) and beyond.
Though this guide contains information on protocols, it is not intended to be a complete reference. This guide is a reference for
configuring protocols on Dell Networking systems. For complete information about protocols, refer to related documentation,
including IETF requests for comments (RFCs). The instructions in this guide cite relevant RFCs. The
Standards Compliance chapter
contains a complete list of the supported RFCs and management information base files (MIBs).
Audience
This document is intended for system administrators who are responsible for configuring and maintaining networks and assumes
knowledge in Layer 2 and Layer 3 networking technologies.
Conventions
This guide uses the following conventions to describe command syntax.
Keyword Keywords are in Courier (a monospaced font) and must be entered in the CLI as listed.
parameter Parameters are in italics and require a number or word to be entered in the CLI.
{X} Keywords and parameters within braces must be entered in the CLI.
[X] Keywords and parameters within brackets are optional.
x|y Keywords and parameters separated by a bar require you to choose one option.
x||y Keywords and parameters separated by a double bar allows you to choose any or all of the options.
Related Documents
For more information about the Dell Networking switches, refer to the following documents:
• Dell Networking OS Command Reference
• Installing the System
• Dell Quick Start Guide
• Dell Networking OS Release Notes
34
About this Guide