manualshive.com logo in svg

Dell S3845cdn, User Manual

Share
Download
Dell S3845cdn User Manual Download Page 417

Print Quality Problems

|

417

Ghosting

Light-induced fatigue

NOTE:

•

This is caused by leaving one or more drum cartridges exposed to light outside the machine for an 
extended time period.

Action

Yes

No

1

Locate the cause of the problem using 

Device

 > 

Support Pages

 > 

Ghosting Print

.

Is the type of the problem identified?

Proceed to the 
action 
corresponding to the 
type of ghosting.

•

Positive ghost - 2a

•

Negative ghost - 
2b

Contact Dell.

2a

Replace the drum cartridges.

Does this solve your problem?

The task is complete. Go to action 3.

2b

If you are using non-recommended print media, use the 
print media recommended for the printer.

Does this solve your problem?

The task is complete. Contact Dell.

3

Adjust the transfer bias.

If the problem persists, reset the transfer bias to 0 and 
decrease the temperature level of the fusing unit.

Does this solve your problem?

The task is complete. Contact Dell.

Action

Yes

No

1

Locate the cause of the problem using 

Device

 > 

Support Pages

 > 

Repeating Defects

.

Does the pattern on the output match with the chart?

Go to action 2.

Contact Dell.

2

Replace the drum cartridges.

Does this solve your problem?

The task is complete. Contact Dell.

Summary of Contents for S3845cdn





































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands