manualshive.com logo in svg

Dell S3840cdn, User Manual

Share
Download
Dell S3840cdn User Manual Download Page 265

Print Quality Problems

|

265

Random spots/Blurred images

The entire output is blank

3

Increase the temperature level of the fusing unit in 

Device

 > 

Support

 > 

Fusing Unit Temperature 

Adjustment

. 

Does this solve your problem?

The task is complete. Go to action 4.

4

Replace the fusing unit.

Does this solve your problem?

The task is complete. Contact Dell.

Action

Yes

No

Action

Yes

No

1

Ensure that the toner cartridges are installed correctly.

Does this solve your problem?

The task is complete. Go to action 2.

2

Ensure that the drum cartridges are installed correctly.

Does this solve your problem?

The task is complete. Go to action 3.

3

Replace the drum cartridges.

Does this solve your problem?

The task is complete. Contact Dell.

Action

Yes

No

1

If you are using non-Dell brand toner cartridges, enable 
the Non-Dell Toner option.

Does this solve your problem?

The task is complete. Go to action 2.

2

If only one color is blank, replace the drum cartridges. If 
all colors are blank, check the 2nd Belt Transfer Roller 
(2nd BTR) to make sure it is seated correctly or replace 
the 2nd Belt Transfer Roller (2nd BTR).

Does this solve your problem?

The task is complete. Contact Dell.

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands