Dell S3840cdn, User Manual

Page: 105 / 446

Dell Printer Configuration Web Tool |
105
Logout Confirmation
Select the log-out confirmation method from the following:
Advanced Settings
Input Settings
Authentication Settings
Domain Controller •
When no domain controller is registered:
Click
Add
or to add a domain controller. The
Add Domain Controller
screen appears.
Set the new domain controller settings in the
Add Domain Controller
screen.
•
When any controller is registered:
The controller is displayed under
Domain Controller
. To edit an existing
controller, click the controller. The
Edit Domain Controller
screen appears.
Set the existing domain controller settings in the
Edit Domain Controller
screen.
NOTE:
•
Smart Card requires at least one domain controller.
Validate
Enable the following as necessary:
Validate the domain controller certificate returned by the domain controller
server against the domain controller certificate stored on the Device.
Options Timeout
Set the time-out between 1 and 120 seconds in 1 second
increments.
SNTP Select whether or not to enable SNTP.
Device Website Login
Method
You can select the website login method.
Log out user immediately.
Ask user for confirmation before logging out.
Case Sensitive User Name
Select whether or not to ignore the case for log-in user name.
NOTE:
•
This item is displayed when
Login Method
is set to other than
Convenience
.
Log Failed Login Attempts Set the failure count to detect unauthorized access. An error is logged if
authentication fails the number of times specified in
Failed Login Attempt
Limit within a predetermined time (10 minutes).
Limit Login Attempts of
System Administrator This feature protects the settings from being changed by someone
impersonating your system administrator. If authentication for a system
administrator's ID fails more than specified times continuously, access is
denied.
You can specify a login attempt count from 1 to 10.
NOTE:
• The failure count is reset when the machine is restarted.
•
To cancel the access rejection state, restart the machine by switching
off and on the power.
Server Authentication
Response Timeout
Set the server time-out response between 1 and 75 seconds in 1 second
increments.