Setting up the monitor
|
25
Setting up the monitor
Connecting the stand
NOTE: The stand riser and stand base are detached when the monitor is
shipped from the factory.
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that
were included with the stand.
To attach the monitor stand:
1. Connect the stand base to the stand riser.
2. Open the screw handle on the stand base and tighten the screw to secure the
stand riser to the stand base.
3. Close the screw handle.
1
2
3
