Setting up the monitor
│
31
Connecting the stand - S2721QS
NOTE: The stand is not factory-installed.
NOTE: The following instructions are applicable only for attaching the
stand that was shipped with your monitor. If you are attaching a stand
that you purchased from any other source, follow the set up
instructions that were included with the stand.
To attach the monitor stand:
1.
Follow the instructions on the flaps of packaging box to remove the stand
from the top cushion that secures it.
2.
Remove the stand base and stand riser from the packaging cushion.
3.
Align and place the stand riser on the stand base.
4.
Open the screw handle at the bottom of the stand base and turn it clockwise
to secure the stand assembly.
5.
Close the screw handle.
