About Your Monitor | 13
Power Management Modes
If you have VESA’s DPM-compliant video card or software installed in your PC, the monitor
can automatically reduce its power consumption when not in use. This is referred to as
power save mode*. If the computer detects input from the keyboard, mouse, or other input
devices, the monitor automatically resumes functioning. The following table shows the
power consumption and signaling of this automatic power saving feature.
VESA
Modes
Horizontal
Sync
Vertical
Sync
Video Power Indicator
Power Consumption
Normal
operation
Active
Active
Active White
42 W (maximum)**
29 W (typical)
Active-off
mode
Inactive
Inactive Off
White
(Glowing)
Less than 0.5 W
Switch off
-
-
-
Off
Less than 0.3 W
Energy Star
Power Consumption
P
ON
20.74 W***
E
TEC
65.24 kWh****
The OSD operates only in the normal operation mode. If you press any button in the active-
off mode, one of the following message is displayed:
*Zero power consumption in OFF mode can only be achieved by disconnecting
the AC mains cable from the monitor.
**Maximum power consumption with maximum luminance.
***Power consumption of on mode as defined in Energy Star 7.0 version.
****Total energy consumption in kWh as defined in Energy Star 7.0 version.
This document is informational only and reflects laboratory performance. Your product may
perform differently, depending on the software, components and peripherals you ordered
and shall have no obligation to update such information. Accordingly, the customer should
not rely upon this information in making decisions about electrical tolerances or otherwise.
No warranty as to accuracy or completeness is expressed or implied.
Activate the computer and the monitor to gain access to the OSD.
NOTE:
Energy Star certified.
