Dell PS-M4110, Installation Manual

Page: 15 / 70

9
Dell EqualLogic PS-M4110 Installation Guide Optional Considerations
Disable unicast storm control on each switch that handles iSCSI traffic if the switch provides this feature.
However, the use of broadcast and multicast storm control is encouraged on switches.
•
Enable Jumbo Frames
Enable Jumbo Frames on each switch and each NIC that handles iSCSI traffic.
PS series arrays support Jumbo Frames, which is enabled by default (MTU 9000). Enable Jumbo Frames on
each switch and iSCSI initiator (NIC) to take advantage of this feature. For further information, refer to the
associated documentation for your switch and NIC.
Optional Considerations
•
Management Network
Optionally, Ethernet 1 on the PS-M4110 array can be set up for a management port and be accessed through
the CMC to keep management traffic separate from iSCSI traffic.
You can do this by using the Dell Chassis Management Console command line interface (CLI), or the Equal-
Logic Group Manager GUI or CLI. See
Setting up a Dedicated Management Port on page 46 .