108
Adding and Replacing Parts
FILE LOCATION: C:\Documents and Settings\reggie_davis\Desktop\Projects-07\BEN\Source\parts.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 1 / 2 5/ 0 7 – FO R PR O O F O N LY
Wireless Local Area Network (WLAN) Cards
1
Follow the procedures in "Before You Begin" on page 95.
2
Remove the hinge cover (see "Hinge Cover" on page 100).
3
Remove the keyboard (see "Keyboard" on page 101).
4
Ground yourself by touching one of the metal connectors on the back of the computer.
NOTE:
If you leave the area, ground yourself again when you return to the computer.
5
If a card is not already installed, go to step 6. If you are replacing a card, remove the existing card:
a
Disconnect the antenna cable from the card.
b
Release the card by spreading the metal securing tabs until the card pops up slightly.
1
antenna cables
1