Installing the intrusion switch
1. Place the intrusion switch into the slot in the system chassis.
2. Replace the screw and secure the switch to the chassis.
3. Connect the cable to the system board.
4. Install the:
a.
b.
c.
After working inside your computer
.
Internal chassis speaker
Removing the internal chassis speaker
Before working inside your computer
.
2. Remove the: .
48
Removing and installing components
Summary of Contents for Precision 5820 Tower
