manualshive.com logo in svg

Dell Precision 5510, Owner'S Manual, Page: 39 / 42

Share
Download
Dell Precision 5510 Owner'S Manual Download Page 39

Table 20. Storage

Feature

Specification

Storage:

Storage Interface

SATA 3 Gbps
SATA 6 Gbps

Drives configurations:

Hard Drives (optional)

one internal 2.5 inch SATA HDD (supports Intel Smart Response 
Technology)

Solid State Drives (optional)

one Solid State Drive (SSD), with Intel Cache support

Size:

512 GB and 1 TB 

Table 21. Battery

Feature

Specification

Type

Li-polymer 3-cell (56 Whr) / 6-cell (84 Whr)

Dimensions :

56 Whr :

Depth

223.20 mm (8.79 in)

Height

7.20 mm (0.28 in)

Width

71.80 mm (2.83 in)

Weight

0.54 lb (0.24 kg)

84 Whr :

Depth

330.50 mm (13.01 in)

Height

7.20 mm (0.28 in)

Width

71.80 mm (2.83 in)

Weight

0.76 lb (0.34 kg)

Voltage

11.4 V

Life span

300 discharge/charge cycles

Temperature range:

Operating (approximate)

• Charge : 0 °C to 50 °C (32 °F to 158 °F)
• Discharge: 0 °C to 70 °C (32 °F to 122 °F)
• Operating: 0 °C to 35 °C (32 °F to 95 °F)

Non-operating

–40 °C to 65 °C (–40 °F to 149 °F)

Coin-cell battery

ML1220

39

Summary of Contents for Precision 5510











































Reviews:

No comments