b Tighten the 4 captive screws to secure the heat sink assembly to the system board.
NOTE:
Tighten the screws in a sequential order (1,2,3,4) as shown on the heat sink label.
CAUTION:
Ensure that the heat sink is held parallel to the system board to prevent damaging the components.
NOTE:
Ensure that the screw is tightened completely before moving on to the next screw.
2
Install the:
a
b
3
Follow the procedure in
After working inside your computer
.
Processor
Removing processor
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove the processor:
a Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1].
b Lift the lever upward and lift the processor shield [2].
c Lift the processor out of the socket [3].
40
Removing and installing components
