Dell PowerVault TL1000, User Manual

Page: 14 / 192

If the symbol is... It means...
This part or unit is heavy but has a weight smaller than 18 kg (39.7 lb). Use
care when lifting, removing, or installing this part or unit. (C008)
A hazardous condition due to the unit's susceptibility to electrostatic
discharge.
Laser safety and compliance
Table 1. Class I Laser Product
The library might contain a laser assembly that complies with the performance standards set by the
US Food and Drug Administration for a Class I laser product. Class I laser products do not emit
hazardous laser radiation. The library has the necessary protective housing and scanning safeguards
to ensure that laser radiation is inaccessible during operation or is within Class I limits. External
safety agencies have reviewed the library and have obtained approvals to the latest standards as they
apply.
Performing the safety inspection procedure
Before you service the unit, complete the following safety inspection procedure.
1. Stop all activity between the host and the library’s tape drive.
2. Turn off the power to the library by switching the Power button on the rear of the tape library to the
Off position.
3. Disconnect the tape drive’s SAS cable.
4. Unplug the library’s power cord from the electrical outlet and the library’s power supply unit.
5. Check the library’s power cords for damage, such as a pinched, cut, or frayed cord.
6. Check the tape drive’s SAS cable for damage.
7. Check the cover of the library for sharp edges, damage, or alterations that expose its internal parts.
8. Check the cover of the library for proper fit. It should be in place and secure.
9.
Check the product label at the rear of the library to make sure that it matches the voltage at your
outlet.
xiv
Dell PowerVault TL1000 Tape Autoloader: User's Guide