Dell PowerVault TL1000 Page 107 User Manual Download

Page: 107 / 192

Accessor statistics

Select Service Library > Usage Statistics to view statistics information about the movement of the
robotics of the library.

Motion counts - Lists the accumulated operation count for all movements, accessor movements, picker
movements, and X-axis movements.

Retry counts - Lists the accumulated number of retries (reattempts to load cartridges) in the drive and
the cartridges positions by the accessor.

Error counts - Lists the accumulated number of errors for the accessor, X-axis movements, and drive
load and unload operations.

Click Refresh to read the accessor statistics from the library. The Last refresh shows the time of the most
recent library data refresh.

a29z0135

Figure 106. Usage Statistics screen

Operations

Summary of Contents for PowerVault TL1000

































































































































































































Search results

Summary of Contents for PowerVault TL1000

Reviews:

Related manuals for PowerVault TL1000

Brands by name

Popular brands

Dell PowerVault TL1000, User Manual

Search results

Summary of Contents for PowerVault TL1000

Reviews:

Related manuals for PowerVault TL1000

Brands by name

Popular brands