Dell PowerVault TL1000, User Manual, Page: 132 / 192

2. Insert the end of a straightened paper clip, or similar object, into the lock release access hole. Gently
push the lock mechanism to release the lock and eject the cartridge magazine.
3.
If the I/O station is enabled, push the lock mechanism twice or push and hold the lock mechanism
until the cartridge is withdrawn far enough to clear the I/O station lock.
4. Remove the cartridge magazine from the front of the library. If the magazine is stuck in the library
and does not eject, see “Contacting Dell technical support” on page 111
5. Examine the magazine and cartridges for damage.
v If there is damage to a cartridge, replace that cartridge.
v If there is damage to the magazine, replace the magazine.
Figure 114. Cartridge magazine lock release access hole
114
Dell PowerVault TL1000 Tape Autoloader: User's Guide