Dell PowerVault DL4000 User Manual Download Page 97

Page: 97 / 175

Text Box

Description

Automatic reboot
after install

Select to specify whether the Core starts upon the completion of the
deployment and installation of the AppAssure Agent Installer.

Click

Verify

to validate the credentials you entered.

The

Deploy Agent

dialog box displays a message indicating that validation is being performed.

Click

Abort

if you want to cancel the verification process.

After the verification process completes, a message indicating that verification has been completed
appears.

Click

Deploy

A message indicating that the deployment has started appears. You can view the progress in the

Events

tab.

Click

Show details

to view more information about the status of the agent deployment.

Click

Replicating a new agent

When you add an AppAssure Agent for protection on a source core, AppAssure gives you the option to

replicate the new agent to an existing target core.
To replicate a new agent:

Navigate to the Core Console, and then click the

Machines

tab.

In the

Actions

drop-down menu, click

Protect Machine

In the

Protect Machine

dialog box, enter the information as described in the following table.

Text Box

Description

Host

Enter the host name or IP address of the machine that you want to protect.

Port

Enter the port number the AppAssure Core uses to communicate with the
agent on the machine.

Username

Enter the username used to connect to this machine. For example,
Administrator.

Password

Enter the password used to connect to this machine.

Click

Connect

to connect to this machine.

Click

Show Advanced Options

, and edit the following settings as needed.

Text Box

Description

Display Name

Enter a name for the machine to be displayed in the Core Console.

Repository

Select the repository on the AppAssure Core where the data from this machine
is stored.

Encryption Key

Specify whether encryption is applied to the data for every volume on this
machine stored in the repository.

NOTE: The encryption settings for a repository are defined under the

Configuration

tab in the Core Console.

Summary of Contents for PowerVault DL4000
















































































































































































Search results

Summary of Contents for PowerVault DL4000

Reviews:

Brands by name

Popular brands

Dell PowerVault DL4000, User Manual

Search results

Summary of Contents for PowerVault DL4000

Reviews:

Brands by name

Popular brands