Text Box
Description
If set to
Sync
, Windows controls the caching as well as the synchronous input/
output.
Bytes per Sector
Specify the number of bytes you want each sector to include. The default
value is 512.
Average Bytes per
Record
Specify the average number of bytes per record. The default value is 8192.
5.
Click
Save
.
The
Repositories
screen is displayed to include the newly added storage location.
6.
Repeat Step 4 through Step 7 to add more storage locations for the repository.
7.
Click
OK
.
Checking a repository
The appliance can perform a diagnostic check of a repository volume when errors occur. Core errors
could be the result of it being improperly shut down, or a hardware failure, among other reasons.
NOTE: This procedure must only be performed for diagnostic purposes.
To check a repository:
1.
On the
Configuration
tab, click
Repositories
, select
>
next to the repository that you want to check.
2.
In the
Actions
pane, click
Check
.
The
Check Repository
dialog box appears.
3.
In the
Check Repository
dialog box, click
Check
.
NOTE: If the check fails, restore the repository from an archive.
Deleting a repository
To delete a repository:
1.
On the
Configuration
tab, click
Repositories
, select
>
next to the repository that you want to delete.
2.
In the
Actions
pane, click
Delete
.
3.
In the
Delete Repository
dialog box, click
Delete
.
CAUTION: When a repository is deleted, the data contained in the repository is discarded and
cannot be recovered.
When you delete a repository, then you must go through the Open Manage System Administrator
and delete the virtual disks that housed the repository. After you delete the virtual disks, you can re-
provision the disks and recreate the repository.
Remounting volumes
To remount the volumes:
1.
Navigate to the Core Console.
2. Appliance
→
Tasks
.
3.
Click
Remount Volumes
.
36
