Dell PowerVault DL4000 User Manual Download Page 151

Page: 151 / 175

Option

Description

Keep Recovery
Points

To keep all currently stored recovery points for this cluster.

Remove Recovery
Points

To remove all currently stored recovery points for this cluster from the
repository.

Removing cluster nodes from protection

Complete the steps in the following procedures to remove cluster nodes from protection. If you just

want to remove a node from the cluster, see

Converting A Protected Cluster Node To An Agent

. To

remove a cluster node from protection.

Do one of the following:
• In the Core Console, click the

Machines

tab, and then select the cluster that contains the node

that you want to remove. On the

Machines

tab for the cluster, select the node that you want to

remove.

• In the left navigation area, under the related cluster, select the node that you want to remove.

Click the

Actions

drop-down menu and then click

Remove Machine

Select one of the options described in the following table.

Option

Description

Relationship Only

Removes the source core from replication but retains the replicated recovery
points.

With Recovery
Points

Removes the source core from replication and deletes all replicated recovery
points received from that machine.

Removing all nodes in a cluster from protection

To remove all nodes in a cluster from protection:

Do one of the following:
• In the Core Console, click the

Machines

tab, and select the cluster that contains the nodes that

you want to remove, then click the

Machines

tab for the cluster.

• From the left navigation area, select the cluster that contains the nodes that you want to remove,

and then click the

Machines

tab.

Click the

Actions

drop-down menu at the top of the

Machines

tab and then click

Remove Machines

Select one of the options described in the following table.

Option

Description

Relationship Only

Removes the source core from replication but retains the replicated recovery
points.

With Recovery
Points

Removes the source core from replication and deletes all replicated recovery
points received from that machine.

151

Summary of Contents for PowerVault DL4000
















































































































































































Search results

Summary of Contents for PowerVault DL4000

Reviews:

Related manuals for PowerVault DL4000

Brands by name

Popular brands

Dell PowerVault DL4000, User Manual

Search results

Summary of Contents for PowerVault DL4000

Reviews:

Related manuals for PowerVault DL4000

Brands by name

Popular brands