manualshive.com logo in svg

Dell PowerVault DL4000, User Manual

Share
Download
Dell PowerVault DL4000 User Manual Download Page 139

4.

Verify that the Universally Unique Identifier (UUID) contains the new volumes by using either the 

blkid

 command or the 

ll /dev/disk/by-uuid

 command.

5.

Verify that 

/etc/fstab

 contains the correct UUIDs for the root and boot volumes.

6.

Install Grand Unified Bootloader (GRUB) by using the following commands:

mount --bind /dev/ /mnt/dev

mount --bind /proc/ /mnt/proc

chroot/mnt/bin/bash

grub-install/dev/sda

7.

Verify that the /boot/grub/grub.conf file contains the correct UUID for the root volume, or update it 

as needed by using a text editor.

8.

Remove the Live CD disk from the CD-ROM drive and restart the Linux machine.

Viewing events and alerts 

To view events and alerts:

1.

Do one of the following:
• In the Core Console, on the Machines tab, click the hyperlink for the machine for which you want 

to view events.

• In the left 

Navigation

 area of the Core Console, select the machine for which you want to view 

events.

2.

Click the 

Events

 tab.

A log of all events for current tasks and alerts appears.

139

Summary of Contents for PowerVault DL4000
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands