Dell PowerScale OneFS Reference Manual Download Page 97

Page: 97 / 208

Administrator action

Verify that the naming service is operating correctly.

400240003

S3 could not parse mpu info for bucket id : 123456. Upload Id 987654. SBT may be broken.

Description

Could not parse mpu info for bucket id.

Administrator action

Contact Dell EMC technical support to open a Service Request (SR).

400240004

S3 key in SBT is invalid. SBT may be broken. Current Basekey = a/b/c.

Description

S3 key in SBT is invalid. SBT may be broken.

Administrator action

Contact Dell EMC technical support to open a Service Request (SR).

400240005

S3 key in SBT has maxed out. SBT may be full for bucket - 123456.

Description

S3 key in SBT has maxed out. SBT may be full for bucket.

Administrator action

Contact Dell EMC technical support to open a Service Request (SR).

Software events

Summary of Contents for PowerScale OneFS

















































































































































































































Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands

Dell PowerScale OneFS, Reference Manual

Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands