Modify alerts by event type id
You can suppress or un-suppress one or more event type ID depending on its current state.
1. Click
Cluster Management
>
Events and Alerts
>
Alert Management
.
2. In the Actions column of the event type ID you want to modify, click
Suppress
or
Un-suppress
.
You can perform an action on multiple event type IDs by selecting the check box next to the event type ID of the alerts you
want to change, then selecting an action from the
Select a bulk action
list.
View alerting rules
You can view a list of all the alerting rules.
1. Click
Cluster Management
>
Events and Alerts
>
Alert Management
.
2. In the
CELOG alerting
area, click the
Alerting rule
tab.
You can view the list of alerting rules.
Create an alerting rule
You can create an alerting rule.
1. Click
Cluster Management
>
Events and Alerts
>
Alert Management
.
2. In the
CELOG alerting
area, click the
Alerting rule
tab.
3. Click
Create alert rule
.
The
Create alert rule
window appears.
4. Enter the following details:
●
Rule name: Enter a name for the new alerting rule.
●
Rule condition: Select a condition (New, New Events, Ongoing, Severity Increase, Severity decrease, Resolved) from the
drop-down list.
●
Send an alert only if the event lasts longer than: Enter the numerical value in the text box and select the unit of time
from the drop-down list.
●
Applies to: Select the check box next to the relevant alert category.
●
Add event group ID: Click
Add event group ID
to add an event group.
●
Select alert channel for this rule: Select the check box next to the relevant channel name.
5. Click
Create rule
.
Modify an alerting rule
You can modify an existing alerting rule.
1. Click
Cluster Management
>
Events and Alerts
>
Alert Management
.
2. In the
CELOG alerting
area, click the
Alerting rule
tab.
3. In the Actions column of the alerting rule you want to modify, click
Edit rule
.
The
Edit alert rule
window appears.
4. Modify the following details:
●
Rule name: You cannot modify the name for an existing alerting rule.
●
Rule condition: Select a condition (New, New Events, Ongoing, Severity Increase, Severity decrease, Resolved) from the
drop-down list.
●
Send an alert only if the event lasts longer than: Modify the numerical value in the text box and select the unit of time
from the drop-down list.
●
Applies to: Select the check box next to the relevant alert category.
●
Add event group ID: Click
Add event group ID
to add a new event group.
●
Select alert channel for this rule: Select the check box next to the relevant channel name.
5. Click
Save Changes
.
20
Introduction to system events
