Figure 23. Installing a power supply unit
Installing the front bezel
Prerequisites
1. Locate and remove the bezel key.
NOTE:
The bezel key is part of the front bezel package.
Steps
1. Align and insert the tabs on the right end of the bezel into the slots on the system.
NOTE:
Ensure that the drive bay is locked before installing the front bezel, for more information see the
section.
2. Fit the left end of the bezel onto the system and press the bezel until you hear the release button click.
3. Lock the bezel.
Install the DM5500 in the rack
31
