manualshive.com logo in svg

Dell poweredge VRTX, Reference Manual, Page: 90 / 931

Share
Download
Dell poweredge VRTX Reference Manual Download Page 90

Trap/EventID

FALSE

LCD Message

Storage battery is absent. Check battery.

Initial Default.

FALSE

Filter 

Visibility

IPMI Alert SNMP 

Alert

Email 

Alert

LC Log

LCD

Power Off Power 

Cycle

Reset

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

BAT0010

Message

The storage battery for disk drive bay

arg1

is low.

Arguments

•

arg1 = 

bay

Detailed 
Description

The system has to remain powered on to charge the battery.

Recommended 
Response Action

Allow the PERC RAID controller battery for the associated bay to charge. If the issue persists, 
contact technical support. Refer to the product documentation to choose a convenient contact 
method.

Category

System Health

SubCategory

BAT = Battery Event

Severity

Severity 2 (Warning)

Trap/EventID

FALSE

LCD Message

No LCD message display defined.

Initial Default.

FALSE

Filter 

Visibility

IPMI Alert SNMP 

Alert

Email 

Alert

LC Log

LCD

Power Off Power 

Cycle

Reset

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

BAT0011

Message

The storage battery for disk drive bay

arg1

is operating normally.

Arguments

•

arg1 = 

bay

Detailed 
Description

None

Recommended 
Response Action

Verify the battery installation, check the system logs for thermal related issues.

Category

System Health

90

Summary of Contents for poweredge VRTX




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments