manualshive.com logo in svg

Dell poweredge VRTX, Reference Manual, Page: 471 / 931

Share
Download
Dell poweredge VRTX Reference Manual Download Page 471

Filter 

Visibility

IPMI Alert SNMP 

Alert

Email 

Alert

LC Log

LCD

Power Off Power 

Cycle

Reset

TRUE

FALSE

TRUE

TRUE

TRUE

TRUE

FALSE

FALSE

FALSE

PDR86

Message

Bad block table on

arg1

is full.

Arguments

•

arg1 = 

physical disk

Detailed 
Description

The number of blocks on the disk that exhibit an error has exceeded the capacity of the drive to 
remap. Any future writes to bad sectors will be unrecoverable.

Recommended 
Response Action

Replace the disk.

Category

Storage

SubCategory

PDR = Physical Disk

Severity

Severity 2 (Warning)

Trap/EventID

4346

LCD Message

No LCD message display defined.

Initial Default.

SNMP Alert;#LCD;#Remote System Log

Filter 

Visibility

IPMI Alert SNMP 

Alert

Email 

Alert

LC Log

LCD

Power Off Power 

Cycle

Reset

TRUE

FALSE

TRUE

TRUE

TRUE

TRUE

FALSE

FALSE

FALSE

PDR87

Message

arg1

was reset.

Arguments

•

arg1 = 

physical device

Detailed 
Description

The physical device was reset. This is a normal part of operations and is not a cause for 
concern.

Recommended 
Response Action

No response action is required.

Category

Storage

SubCategory

PDR = Physical Disk

Severity

Severity 3 (Informational)

Trap/EventID

4347

LCD Message

No LCD message display defined.

471

Summary of Contents for poweredge VRTX




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments