4.
Remove the screws from the rails on the hot swappable hard drive carrier.
5.
Lift the 3.5-inch hard drive adapter out of the 3.5-inch hot swappable hard drive carrier
Figure 43. Removing a 3.5-inch hot swappable hard drive adapter from a 3.5-inch hot swappable hard
drive carrier
1.
3.5 inch hard-drive carrier
2.
screw (5)
3.
hard drive adapter
4.
2.5-inch hard drive
Related Links
Safety instructions
Installing a 3.5-inch hard drive adapter into a hot swap hard drive carrier
Removing a hard drive from a hard drive carrier
Prerequisites
1.
Keep the Phillips #1 screwdriver handy.
2.
Remove the hard drive carrier from the system.
Steps
1.
Remove the screws from the slide rails on the hard drive carrier.
2.
Lift the hard drive out of the hard drive carrier.
Figure 44. Removing a hard drive into a hard drive carrier
1.
screw (4)
2. hard drive
3. hard drive carrier
Related Links
113
