3. filler bracket
4. guide pin
Next steps
1.
Install the expansion card holder.
2.
Install the cooling shroud.
3.
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing the expansion card holder
Installing the expansion card holder
Removing an expansion card
After working inside your system
Removing a GPU card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Remove the cooling shroud.
4.
Remove the expansion-card holder.
Steps
1.
Disconnect the cables from the GPU card.
CAUTION: Do not use excessive force when removing the cables as it can damage the
connectors.
2.
Open the two expansion-card latches by pressing the latches.
3.
Hold the card by its edge, pull the card up to remove it from the card connector and out of the
system.
154
