Dell PowerEdge T30 Owner'S Manual Download Page 9

Page: 9 / 107

Supported regions

Configuration

Supported Operating systems

1x 1 TB Enterprise hard drive

1x DVD RW drive

Microsoft Windows Server 2008 R2 (test

only)

RHEL 7.2

Ubuntu 14.04, 16.04

Only in China

1x Processor Skylake Pentium G4400

1x 4 GB DIMM (Non-ECC)

1x 1 TB Client hard drive

1x DVD RW drive

Ubuntu 14.04, 16.04

1x Processor Skylake Core i3 6100

1x 4 GB DIMM (Non-ECC)

1x 1 TB Client hard drive

1x DVD RW drive

Ubuntu 14.04, 16.04

NOTE:

Dell engineering team has tested Microsoft Windows Server 2008 R2 operating system (OS) on Dell PowerEdge Servers

to ensure OS compatibility. While most OS features work as expected on this platform, some certification tests did not complete
successfully. These findings are documented at Dell.com/ostechsheets.

For more information on the specific versions and additions, see the information on supported operating systems at

dell.com/OSsupport

Front panel

The front panel provides access to the features available on the front of the server, such as the power button, status indicator, and USB
ports.

Front panel features of the PowerEdge T30 system

The following figure and the table describe the front panel features and its indicators.

Dell PowerEdge T30 system overview

Summary of Contents for PowerEdge T30












































































































Search results

Summary of Contents for PowerEdge T30

Reviews:

Related manuals for PowerEdge T30

Brands by name

Popular brands

Dell PowerEdge T30, Owner'S Manual

Search results

Summary of Contents for PowerEdge T30

Reviews:

Related manuals for PowerEdge T30

Brands by name

Popular brands