3.
.
NOTE:
Your system has either half height (HH) or full height (FH) or without GPU card holder, which is based on the type
of GPU card used.
Steps
Insert the HH or FH GPU card holder into the GPU riser module and tighten the captive screw.
Figure 121. Installing the HH card holder
Figure 122. Installing the FH card holder
Next steps
1.
.
2. Follow the procedure listed in
After working inside your system
.
Optional serial COM port
Removing the serial COM port
The procedure to remove serial COM port from Riser 2 is same.
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Before working inside your system
118
Installing and removing system components
