Table 2. Features available on the front of the system (continued)
Item
Ports, panels, and
slots
Icon
Description
●
Quick Sync 2 (wireless): Indicates a Quick Sync enabled
system. The Quick Sync feature is optional. This feature allows
management of the system by using mobile devices called as
OpenManage Mobile (OMM) feature. Using iDRAC Quick Sync
2 with OpenManage Mobile (OMM) aggregates hardware or
firmware inventory and various system level diagnostic and error
information that can be used in troubleshooting the system. For
more information, see the
iDRAC User's Guide
available at
2
Drive
N/A
Enables you to install drives that are supported on your system.
3
Right control panel
N/A
Contains the power button, USB port, iDRAC Direct micro port, and
the iDRAC Direct status LED.
4
Information tag
N/A
The Information tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If
you have opted for the secure default access to iDRAC, then the
Information tag will also contain the iDRAC secure default password.
5
NVMe drive blank
N/A
NVMe drive blank for NVMe drive direct attached configuration.
NOTE:
For more information, see the
Dell EMC PowerEdge R750xa Technical Specifications
on the product documentation
page.
Left control panel view
Figure 3. Left control panel without optional iDRAC Quick Sync 2 indicator
Table 3. Left control panel without optional iDRAC Quick Sync 2 indicator
Item
Indicator, button, or
connector
Icon
Description
1
Status LED indicators
N/A
Indicates the status of the system. For more information, see the
section.
2
System health and system
ID indicator
Indicates the system health. For more information, see the
System health and system ID indicator codes
Dell EMC PowerEdge R750xa system overview
11
