manualshive.com logo in svg

Dell PowerEdge R230, Owner'S Manual

Share
Download
Dell PowerEdge R230 Owner'S Manual Download Page 112

Figure 74. Removing and installing a processor

1.

pin-1 indicator of processor

2.

processor

3.

slot (2)

4.

processor shield

5.

socket lever 

6.

socket keys (2)

7.

socket

Next steps

1.

Install the processor. 

2.

Install the heat sink.

3.

Follow the procedure listed in the After working inside your system section.

Related links

Removing the cooling shroud
Removing the heat sink
Installing the processor
Installing the heat sink
Installing the cooling shroud

Installing a processor

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and 
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support 
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety 
instructions that are shipped with your product.

1.

Follow the safety guidelines listed in the Safety instructions section.

2.

Follow the procedure listed in the Before working inside your system section.

3.

Keep the Phillips #2 screwdriver ready.

4.

If you are upgrading your system, download the latest system BIOS version from 

Dell.com/support

 and follow the instructions 

included in the compressed download file to install the update on your system.

112

Summary of Contents for PowerEdge R230






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands