3
dotted line on the drive drawer
Related link
Mini Enterprise Service Tag
The Mini Enterprise Service Tag is a removable label panel located on the storage sled front panel, which lists the system Service Tag.
Removing the Mini Enterprise Service Tag
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE:
This is a field replaceable unit (FRU). Removal and installation procedures must be performed only by Dell certified
service technicians.
1
Ensure that you read the
.
2
Keep the #1 Phillips screwdriver ready.
Steps
1
Pull the drive drawer handle on the front panel of the storage sled, and keep it in open position.
2
Remove the screw securing the Mini Enterprise Service Tag (MEST) to the sled front panel.
3
Remove the MEST from the sled.
Figure 23. Removing and installing the MEST
1
screw
2
MEST
Next step
Install the MEST.
Related link
Installing the Mini Enterprise Service Tag
Installing and removing storage sled components
25
