Dell PowerConnect J-EX4200, Hardware Manual

Page: 22 / 238

Table 5: Physical Specifications of the J-EX4200 Switch Chassis (continued)
Value Description
• 17.25 in. (43.82 cm)
• 19 in. (48.2 cm) with mounting brackets attached
Chassis width
•
Without power supply installed—17 in. (43.18 cm)
• With power supply installed:
•
320 W AC power supply installed—17 in. (43.18 cm)
• 600 W or 930 W AC power supply installed—19.25 in. (48.9 cm)
Chassis depth
• J-EX4200 switch with 1 power supply: 16–18 lb (7.2–8.2 kg)
•
320 W AC power supply: 2.5 lb (1.1 kg)
• 600 W and 930 W AC power supplies: 3.1 lb (1.4 kg)
Weight
Related
Documentation
Rack Requirements for J-EX4200 Switches on page 63
•
•
Cabinet Requirements for J-EX4200 Switches on page 64
•
Mounting a J-EX4200 Switch on page 90
•
Installing and Connecting a J-EX4200 Switch on page 87
•
Installing and Removing J-EX4200 Switch Hardware Components on page 105
Front Panel of a J-EX4200 Switch
The front panel of a J-EX4200 switch consists of the following components:
•
Network ports—depending on the switch model, either of:
• 10/100/1000Base-T Gigabit Ethernet ports, some or all of which are enabled for
Power over Ethernet (PoE)
•
100Base-FX/1000Base-X SFP ports for use with fiber-optic connections
• Uplink module ports—SFP or SFP+ ports (The uplink module is an optional feature.)
•
LCD panel and the LCD navigation buttons
•
Chassis status LEDs
• Network port LEDs
Figure 1 on page 7 shows the front panel of a J-EX4200 switch with 48 Gigabit Ethernet
ports. Figure 2 on page 7 shows the front panel of a J-EX4200 switch with 24 Gigabit
Ethernet ports. Figure 3 on page 7 shows the front panel of a J-EX4200-24F switch with
24 SFP ports for use with fiber-optic connectors.
6
Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide