Dell PowerConnect 55xx Systems User Guide
71
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\sources\CxUGAdvanced Configuration.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 10 / 3 0 /1 3 - FO R PR O O F O N LY
Accessing the Device Through the CLI
You can manage the device using CLI commands, over a direct connection to
the terminal console, or via a Telnet connection.
Direct Connection
Connect the device to the console and enter the CLI commands upon
receiving a prompt.
Telnet Connection
Telnet is a terminal emulation TCP/IP protocol. RS-232 terminals can be
virtually connected to the local device through a TCP/IP protocol network.
Telnet is an alternative to a local login terminal, where a remote login is
required.
The device supports up to four simultaneous Telnet sessions. All CLI
commands can be used over a Telnet session.
If access is via a Telnet connection, ensure that the device has an IP address
and that software has been downloaded to the device.
To start a Telnet session:
1
Select
Start > Run
.
The
Run
window opens.
2
Type
cmd.
The
cmd
window opens.
3
In the
cmd
window, type
Telnet
<
IP address
>
<Enter>
.
The Telnet session begins.
